1、溫度:施工時溫度應在12℃以上，丙烯酸球場涂料易于熟化，而超過36℃涂料則易起泡。

1, the construction temperature: the temperature is over 12 DEG C, stadium acrylic paint is easy to aging, and more than 36 ℃ coating blister.

2、試水:全場灑水，以測試場地之平整度，在明顯凹陷處做記號。

2, to test the waters: the sprinkler, to test the flatness of the ground, mark the obvious depression.

3、修補:用強化瀝青填充劑拌適量石英砂和水，填平場內凹陷處，減低積水現象。

3, repair: reinforced asphalt filler mix appropriate amount of quartz sand and water filled depressions, floor, reduce the phenomenon of water.

4、劃線:用丙烯酸球場色料濃縮物畫白色標準球場界線兩道。

4, marking: Stadium acrylic pigment concentrates painted white standard pitch line two.

5、面層:用丙烯酸色料濃縮物混合適量石英砂和水攪拌，涂刮二層，以增加丙烯酸球場的耐磨功能。

5, the surface layer: mixing appropriate amount of quartz sand and water with acrylic pigment concentrates, scraping two layers, with wear-resisting function increased acrylic stadium.

6、中層:用丙烯酸球場強化填充劑混合砂、水，攪拌后涂刮一層，以加強面層與底層的粘接。

6, middle: acrylic stadium reinforcing filler mixed sand, water, stirring after coating a layer, in order to strengthen the bonding surface layer and the bottom layer.

7、底層:用強化瀝青填充劑摻砂、水攪拌，鋪涂二層找平地面，使其與丙烯酸球場面層涂料更粘合。

7, the bottom: mixing with reinforced asphalt filler sand, water, PU coated with two layers of leveling the ground, and the acrylic ball scene more adhesive coating.